POLICap 540

Transparent Polyurethane-Based Encapsulation Resin

POLICap 540 — Transparent Polyurethane-Based Encapsulation Resin
93%
light transmission
IP69
protection level
-40 a 90°C
operating range

PoliCAP is an innovative bi-component 2K resin, expertly designed for encapsulating LEDs and electronic components. It stands out for its fast curing capability at room temperature, ensuring a smooth, aesthetically pleasing finish and excellent thermal expansion properties. Its defining feature is exceptional transparency, maintaining the intensity of the luminous flux emitted by LEDs — ideal where light output is crucial — while providing robust protection for components under adverse operating conditions.

Features

  • ✔Excellent light transmission
  • ✔Flexibility to compensate for thermal expansion of printed circuits and components
  • ✔High thermal dissipation
  • ✔Guarantees IP69 protection level

📦 Delivery Format

  • ✔20L canisters
  • ✔80L barrels
  • ✔200L barrels

Applications

  • ✔Internal and external lighting
  • ✔Underwater lighting
  • ✔Classified area lighting
  • ✔Headlights and beacon lamps
  • ✔Electronic equipment in general

Technical Properties

Property Standard Unit Resin (A) Hardener (B)
Shelf life (original packaging) – years 1 1
Color Visual – Clear and transparent Clear and transparent
Specific gravity ASTM D1475 g/ml 1.05–1.06 1.07–1.08
Viscosity ISO 3219 mPa·s 250–650 150–450
Part by volume (pbV) – mL 100/100
Gel time – 20g DIN 16945-16916 min 50–80
Pot life – 20g (double initial viscosity) ST04P15 min 10–12
Curing time tack-free (25°C, 40% RH) – hours 2–4
Suggested curing cycle (25°C, 40% RH) – hours 10–12
Accelerated curing (@50°C) – min 15
Density (cured) ASTM D1475 g/ml 1.06
Hardness (cured) ASTM D2240 Shore D 20–26
Glass transition temperature (DSC) ASTM D3418 °C 5–15
Linear thermal expansion (Tg-10°C)/(Tg+10°C) DIN 53752 ppm/°C 80 / 210
Refractive index (633 nm) – – 1.51
Transmission (2 mm layer) Internal test % 93
Water absorption (1h100°/7d23°) DIN 53752 % <0.8 / <0.5
Tensile strength ISO 527 N/mm² 5–6
Elongation at break ISO 527 % 400–500
Flammability UL 94 – HB
Thermal conductivity ISO 22007-2 W/m·K 0.25
Operating temperature IEC 600085 °C -40 to 90
Dielectric strength (50 Hz, 2 mm) ASTM D149 kV/mm 20–25
Volume resistivity ASTM D257 ohm·cm 1.4 x 10¹⁵
⚠️ Important NotesStore in a clean, dry place below 40°C, hermetically sealed, out of direct sunlight. Flammable in liquid state. Contact with skin and eyes causes irritation — consult the MSDS. It is the customer's responsibility to carry out compatibility and photometric tests for final approval.

POLICap 540

Contact our team for quotes, samples and technical support.

What’s new

FlexGRAF®

FlexGRAF® graphite thermal interface sheets: 350 W/m·K in-plane conductivity, -40 to 400 °C range, UL 94 V0. Available in rolls, with adhesive or as die-cut parts.

Read more ➜

THERMALTape®

THERMALTape® is a thermally conductive double-sided tape with a fiberglass carrier and ceramic fillers, bonding heat sinks to components without screws or clips.

Read more ➜

COOLPad®

COOLPad® thermal gap filler pads combine low thermal resistance with high conformability, available in multiple thicknesses, hardnesses and thermal conductivities.

Read more ➜

COOLPhase®

COOLPhase® phase change thermal pads offer excellent wettability and minimal contact resistance, replacing thermal grease with a clean, easy-to-apply pad.

Read more ➜

FORMAPad® GI-5100

FORMAPad® GI-5100 is a one-component gel-type thermal pad with exceptional conformability and low contact resistance for uneven surfaces and fragile components.

Read more ➜

LEDGlue® LG4000

LEDGlue® LG4000 is a one-component, thermally conductive silicone adhesive that bonds LEDs and electronic components while efficiently dissipating heat.

Read more ➜
Product and
Service catalogue
Advanced Materials for Heat Control In Electronics.
Thermal Interfaces, Techincal Salants, Encapsulation, CFD simulation services.
Company
Solutions and Applications
Contact us

USA

Telephone: 1-800-777-7334
E-mail: sales@cdiweb.com
7345 W Sand Lake Rd, St 210, Office 431, Orlando, Fl, 32819, USA

Canada

Telephone: +1 (877) 691-4121
E-mail: canada@cdiweb.com

Terms